Return to other rental items
PM10 IMPACTOR
The Dekati ® PM10 impactor is a three-stage cascade impactor for determining particle size distribution. The principle of operation of the Dekati ® PM10 impactor is based on the inertial size classification and gravimetric or chemical analysis of particle samples classified according to their size. This impactor has cut-off points of 10, 2.5, making it an ideal choice for PM10, PM2.5 and PM1.0 measurements. The impactor is made of stainless steel allowing direct sampling at high temperatures and heating the impactor unit up to 200°C. The Dekati ® PM10 Impactor meets all the requirements set out in ISO23210 for the determination of PM10 and PM2.5 mass concentrations in stationary sources.
Characteristics :
Gravimetric or chemical analysis of samples classified by size ;
PM10, PM2.5 and PM1.0 detection ;
PM10 + PM2.5 and PM10 + PM1.0 settings also available ;
Sample flow versions of 10 and 30 lpm available ;
25 mm substrates used in the impactor stages, 47 mm final stage filters for the smallest particle size fraction ;
Calibrated with aluminum fiber and quartz filters ;
Stainless steel construction for operation even in harsh environments ;
Can be heated up to 200°C ;
Complies with ISO23210 standard for PM10 and PM2.5 measurements from stationary sources.
Air quality measurements ;
Studies on occupational health and safety ;
Studies of the combustion process ;
Stack testing measurements.
Return to other rental items
DO NOT HESITATE TO SUBMIT ALL YOUR REQUESTS !
Call us at :
+33 967 124 329 or +33 442 104 329
contact@etalonair.com